Technology and Livelihood Education (TLE) Specializations | CGs, LM, TG (Free Downloads)

Technology and Livelihood Education (TLE) Specialization | Curriculum Guides (CG), Learning Modules (LM), Teaching Guides (TG)

Technology and Livelihood Education (TLE) and Technical-Vocational-Livelihood (TVL) Track specializations may be taken between Grades 9 to 12. Exploratory Subjects at 40 hours per quarter are taken during Grades 7 to 8.

AGRI-FISHERY ARTS

Specialization	Number of Hours	Pre-requisite
Agricultural Crops Production (NC I); Teaching Guide \| Module	320 hours
Agricultural Crops Production (NC II) updated based on the TESDA Training Regulations published December 28, 2013 Teaching Guide \| Module	640 hours
Agricultural Crops Production (NC III) Teaching Guide \| Module	640 hours	Agricultural Crops Production (NC II)
Animal Health Care Management (NC III) Teaching Guide \| Module	320 hours	Animal Production (Poultry Chicken) (NC II) or Animal Production (Ruminants) (NC II) or Animal Production (Swine) (NC II)
Animal Production (Poultry-Chicken) (NC II) Teaching Guide \| Module updated based on the TESDA Training Regulations published December 28, 2013	320 hours
Animal Production (Ruminants) (NC II) updated based on the TESDA Training Regulations published December 28, 2013 Teaching Guide \| Module	320 hours
Animal Production (Swine) (NC II) updated based on the TESDA Training Regulations published December 28, 2013 Teaching Guide \| Module	320 hours
Aquaculture (NC II) Teaching Guide \| Module	640 hours
Artificial Insemination (Ruminants) (NC II) Teaching Guide \| Module	160 hours	Animal Production (Large Rumninats) (NC II)
Artificial Insemination (Swine) (NC II) Teaching Guide \| Module	160 hours	Animal Production (Swine) (NC II)
Fish Capture (NC II) Teaching Guide \| Module	640 hours
Fishing Gear Repair and Maintenance (NC III) Teaching Guide \| Module	320 hours
Fish-Products Packaging (NC II) Teaching Guide \| Module	320 hours
Fish Wharf Operation (NC I) Teaching Guide \| Module	160 hours
Food Processing (NC II) Teaching Guide \| Module	640 hours
Horticulture (NC III) Teaching Guide \| Module	640 hours	Agricultural Crops Production (NC II)
Landscape Installation and Maintenance (NC II) Teaching Guide \| Module	320 hours
Organic Agriculture (NC II) Teaching Guide \| Module	320 hours
Pest Management (NC II) Teaching Guide \| Module	320 hours
Rice Machinery Operation (NC II) Teaching Guide \| Module	320 hours
Rubber Processing (NC II) Teaching Guide \| Module	320 hours
Rubber Production (NC II) Teaching Guide \| Module	320 hours
Slaughtering Operations (NC II) Teaching Guide \| Module	160 hours
Work Immersion	at least 80 hours

HOME ECONOMICS

Specialization	Number of Hours	Pre-requisite
Attractions and Theme Parks (NC II) Teaching Guide \| Module	160 hours
Barbering (NC II) Teaching Guide \| Module	320 hours
Bartending (NC II) Teaching Guide \| Module	320 hours
Beauty/Nail Care (NC II) Teaching Guide \| Module	160 hours
Bread and Pastry Production (NC II) Teaching Guide \| Module	160 hours
Caregiving (NC II) Teaching Guide \| Module	640 hours
Commercial Cooking (NC III) Teaching Guide \| Module	320 hours	Cookery (NC II)
Cookery (NC II) Teaching Guide \| Module	320 hours
Dressmaking (NC II) Teaching Guide \| Module	320 hours
Events Management Services (NC III) Teaching Guide \| Module	320 hours
Fashion Design (Apparel) (NC III) Teaching Guide \| Module	640 hours	Dressmaking (NC II) or Tailoring (NC II)
Food and Beverage Services (NC II) updated based on the TESDA Training Regulations published December 28, 2013 Teaching Guide \| Module	160 hours
Front Office Services (NC II) Teaching Guide \| Module	160 hours
Hairdressing (NC II) Teaching Guide \| Module	320 hours
Hairdressing (NC III)Teaching Guide \| Module	640 hours	Hairdressing (NC II)
Handicraft (Basketry, Macrame) (Non-NC) Teaching Guide \| Module	160 hours
Handicraft (Fashion Accessories, Paper Craft) (Non-NC) Teaching Guide \| Module	160 hours
Handicraft (Needlecraft) (Non-NC) Teaching Guide \| Module	160 hours
Handicraft (Woodcraft, Leathercraft) (Non-NC) Teaching Guide \| Module	160 hours
Housekeeping (NC II) updated based on the TESDA Training Regulations published December 28, 2013 Teaching Guide \| Module	160 hours
Local Guiding Services (NC II) Teaching Guide \| Module	160 hours
Tailoring (NC II) Teaching Guide \| Module	320 hours
Tourism Promotion Services (NC II) Teaching Guide \| Module	160 hours
Travel Services (NC II) Teaching Guide \| Module	160 hours
Wellness Massage (NC II) Teaching Guide \| Module	160 hours
Work Immersion	at least 80 hours

INFORMATION AND COMMUNICATIONS TECHNOLOGY (ICT)

Specialization	Number of Hours	Pre-requisite
Animation (NC II)	320 hours
Broadband Installation (Fixed Wireless Systems) (NC II)	160 hours	Computer Systems Servicing (NC II)
Computer Programming (.net Technology) (NC III)	320 hours
Computer Programming (Java) (NC III) updated based on the TESDA Training Regulations published December 28, 2013	320 hours
Computer Programming (Oracle Database) (NC III) updated based on the TESDA Training Regulations published December 28, 2013	320 hours
Computer Systems Servicing (NC II) updated based on the TESDA Training Regulations published December 28, 2013	640 hours
Contact Center Services (NC II)	320 hours
Illustration (NC II)	320 hours
Medical Transcription (NC II)	320 hours
Technical Drafting (NC II)	320 hours
Telecom OSP and Subscriber Line Installation (Copper Cable/POTS and DSL) (NC II)	320 hours	Computer Systems Servicing (NC II)
Telecom OSP Installation (Fiber Optic Cable) (NC II)	160 hours	Computer Systems Servicing (NC II)
Work Immersion	at least 80 hours

INDUSTRIAL ARTS

Specialization	Number of Hours	Pre-requisite
Automotive Servicing (NC I) updated based on the TESDA Training Regulations published December 28, 2013Teaching Guide \| Module	640 hours
Automotive Servicing (NC II) Teaching Guide \| Module	640 hours	Automotive Servicing (NC I)
Carpentry (NC II) Teaching Guide \| Module	640 hours
Carpentry (NC III) Teaching Guide \| Module	320 hours	Carpentry (NC II)
Construction Painting (NC II)Teaching Guide \| Module	160 hours
Domestic Refrigeration and Airconditioning (DOMRAC) Servicing (NC II)Teaching Guide \| Module	640 hours
Driving (NC II)Teaching Guide \| Module	160 hours
Electrical Installation and Maintenance (NC II)Teaching Guide \| Module	640 hours
Electric Power Distribution Line Construction (NC II)Teaching Guide \| Module	320 hours	Electrical Installation and Maintenance (NC II)
Electronic Products Assembly and Servicing (NC II)Teaching Guide \| Module updated based on the TESDA Training Regulations published December 28, 201 3	640 hours
Furniture Making (Finishing) (NC II) Teaching Guide \| Module	480 hours
Instrumentation and Control Servicing (NC II) Teaching Guide \| Module	320 hours	Electronic Products Assembly and Servicing (EPAS) (NC II)
Gas Metal Arc Welding (GMAW) (NC II) Teaching Guide \| Module	320 hours	Shielded Metal Arc Welding (SMAW) (NC II)
Gas Tungsten Arc Welding (GTAW) (NC II) Teaching Guide \| Module	320 hours	Shielded Metal Arc Welding (GMAW) (NC II)
Machining (NC I) Teaching Guide \| Module	640 hours
Machining (NC II) Teaching Guide \| Module	640 hours	Machining (NC I)
Masonry (NC II) Teaching Guide \| Module	320 hours
Mechatronics Servicing (NC II) Teaching Guide \| Module	320 hours	Electronic Products Assembly and Servicing (EPAS) (NC II)
Motorcycle/Small Engine Servicing (NC II) Teaching Guide \| Module	320 hours
Plumbing (NC I) Teaching Guide \| Module	320 hours
Plumbing (NC II) Teaching Guide \| Module	320 hours	Plumbing (NC I)
Refrigeration and Air-Conditioning (Packaged Air-Conditioning Unit [PACU]/Commercial Refrigeration Equipment [CRE]) Servicing (NC III) Teaching Guide \| Module	640 hours	Domestic Refrigeration and Airconditioning (DOMRAC) Servicing (NC II)
Shielded Metal Arc Welding (NC I) Teaching Guide \| Module	320 hours
Shielded Metal Arc Welding (NC II) Teaching Guide \| Module	320 hours	Shielded Metal Arc Welding (NC I)
Tile Setting (NC II) Teaching Guide \| Module	320 hours
Transmission Line Installation and Maintenance (NC II) Teaching Guide \| Module	640 hours	Electrical Installation and Maintenance (NC II)
Work Immersion	at least 80 hours

TVL MARITIME

Specialization	Number of Hours	Pre-requisite
Navigational Watch 1 Teaching Guide \| Module	80 hours
Navigational Watch 2 Teaching Guide \| Module	80 hours	Navigational Watch 1 and Safety 1
Navigational Watch 3 Teaching Guide \| Module	80 hours	Navigational Watch 2
Engine Watch 1 Teaching Guide \| Module	80 hours	Safety 1
Engine Watch 2 Teaching Guide \| Module	80 hours	Engine Watch 1
Safety 1 Teaching Guide \| Module	80 hours
Safety 2 Teaching Guide \| Module	80 hours	Engine Watch 2
Ship’s Catering Services (NC I) Teaching Guide \| Module	80 hours
Work Immersion/Research/Career Advocacy/Culminating Activity

Sources: deped.gov.ph
Scribd.com, Slideshare

9 comments:

UnknownJanuary 28, 2020 at 10:33 PM
super thanks po sa napaka informative na mga docs hopefully magkaroon na din po ng DLL CSS9 AND 10
UnknownMay 28, 2020 at 11:09 PM
Maraming salamat po!
UnknownJuly 8, 2020 at 3:08 AM
Slamat po
UnknownAugust 17, 2020 at 5:58 AM
paano po madownload?
UnknownAugust 21, 2020 at 12:50 AM
How to download po?
The BloggerAugust 22, 2020 at 12:26 AM
Just click on the Course Titles po.. you will be redirected to the pdf file..
JACKDecember 23, 2020 at 5:02 AM
Yes i am totally agreed with this article and i just want say that this article is very nice and very informative article.I will make sure to be reading your blog more. You made a good point but I can't help but wonder, what about the other side? !!!!!!Thanks Closed Captions
UnknownJanuary 12, 2021 at 5:29 AM
thank you very much po its a big help
UnknownApril 16, 2021 at 10:32 PM
How can we download the macramé learning module po? I tried to click the course tile and it redirected to the curriculum guide.

Search

Thursday, July 18